Pyramida N 60 User Manual download pdf (Page 31)

Don’t forget to switch the extractor fan on as soon as you

start using the stove or cooking panel. It is necessary for

normal kitchen ventilation.

For complete ventilation it is necessary to switch the fan

off not earlier than 15 minutes after the cooking process has

finished.

The extractor fan is equipped with front control panel

corresponding set of buttons. Buttons “•”, “••”, “•••” switch

rates. While warming food up it is enough to use the fan on

the low fan rate. For standard cooking conditions (brewing

and frying on 1-2 burners) one should use medium fan rate.

High fan rate is intended to remove large quantity of steam,

smoke and mixed kitchen smells, while all the burners are

working.

One may switch the rate buttons in any direction. To switch

the fan out use “0” button.

CONTROL PANEL

1. Turn on or off the lightning.

2. Turns off the fan.

3. Turns off the low speed of the

fan.

4. Turns on low speed of the

fan.

5. Turns on high speed of the

fan.

RECIRCULATION

The following actions must be done for work of the cooking

hood in mode of an air recirculation:

- Do not connect cooking hood to the air duct (it is allowed

not to install an air duct adapter );

- install casing of the air duct in such a way as it’s upper

part and jalousies on it not to be overlapped;

- Install additional charcoal filters into the cooking hood

(2 pcs.).

The charcoal filters are not included into the delivery set of

the cooking hood and should be purchased separately.

The charcoal filters are not subject to cleaning and should

be replaced with new after 3-4 months.

1 2 43 5

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Pyramida N 60 User Manual Page 31